Boss Audio Systems BPRZR5, Руководство по установке

Страница: 17 / 24

- 16 -
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
INSTALLATION MANUAL INSTALLATION MANUAL
BPRZR5
IPX6 RATED 1000 WATTS TRUE PLUG-N-PLAY
POLARIS RZR XP1000 5 SPEAKER AUDIO SYSTEM KIT
STEP4 STEP3
STEP2 STEP1
Two screws can be unbolted to loosen the metal
base of mounting band to adjust the mounting
angle. Making sure to put all components of the
mounting hardwares in a safe location.
After loosening two bolted screws and then twist
the metal base to determine the optimal location
for your speakers onto the roll cage of your RZR.
And then re-bolted two screws in place to secure
the metal base of mounting band tightly.
Place the front rubber pad on the metal base of
the mounting clamp.
Place the supplied rubber strip arround the cage
bar to prevent scraching. Push the aluminum band
over the cage bar. Align the a luminum bands with the metal
base of mounting bands on the waketower speaker.
Installation instruction
STEP6 STEP5
Secure the aluminum bands to the metal base of
mounting bands using a pair of M6 x 60mm screw,
M6 flat washers, and M6 locknuts as illustrated. The
locknut should be installed in to the hex shaped recess
on one end of each band.Hand-tighten, allowing just
enough freedom to rotate the waketower speaker
arround the cage bar.
RZR-62A speaker installation completed.
Place the front rubber pad on the metal base of the
mounting band.
Place the supplied rubber strip around the cage bar
to prevent scratching.
Then push the aluminum bands over the cage bar,
and align the aluminum bands with the metal base
of the mounting band on the speaker.
48 x 30 mm rubber pad
Aluminum band
Rubber strip
Mounting cage
bar of your RZR
Secure the aluminum bands to the metal base of the
mounting band using a pair of M6 x 60mm screws,
M6 flat washers, and M6 locknuts as illustrated. The
locknuts should be installed into the hex shaped
recess on one end of each band.
Hand-tighten to the degree which allows just enough
freedom to rotate the speaker around the cage bar.
The RZR-62A speaker installation now completes.