Bose T1 ToneMatch Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 70

background image

67

Troubleshooting

Problem

What to check

Poor quality
sound from a
microphone or
instrument
connected to
the T1.

• Make sure there is no unwanted zEQ or Para EQ equalization applied.
• Verify that you have selected an appropriate ToneMatch engine preset for
your microphone/instrument. If you do not want to use a ToneMatch engine
preset, make sure ToneMatch is set to flat.
• Make sure there are no unwanted effects (Comp/Gate, Mod, Delay, Reverb)
on your input channel. Check the Status in the Prefs menu for any currently
active effects.
• Check that the T1 input Trim is adjusted properly for your microphone /
instrument. The signal LED should be green; if the LED is red, lower the Trim
level until it is green.
• Try a different microphone or instrument cable.
• Check the cable connecting your microphone or instrument to the T1 audio
engine. Make sure the cable plug is fully inserted into the microphone /
instrument output connector and the T1 input connector.
• Check the settings (if any) on your microphone or instrument.
• Check the batteries (if any) in your microphone or instrument.

Not hearing any
effects.

• Check that you pressed the correct CH Edit button.
• Make sure the FX Mute button is not pressed for the channel in question.

T1 not
responding to
control knobs

• Turn off the audio engine. Wait 30 seconds and turn the unit on again.

Master volume
control has no
effect.

• Verify that the Master output is configured for Post Master Volume operation
in the Prefs menu under Master Out.

With nothing
plugged into the
T1 input
connectors, a
slight hum or
buzz is heard
from the L1
system.

• Plug the T1 and the L1 power stand into the same AC mains outlet.
• Using an AC outlet tester, test the AC outlet that the T1 and/or the L1 power
stand is plugged into for reversed or open hot, neutral and/or ground
contacts.
• If using an extension cord, make sure that the cord is also tested as above.

Too much, or
not enough
bass, mid-range
or high
frequencies.

• Make sure there is no unwanted zEQ or Para EQ equalization applied.
• Verify that you have selected an appropriate ToneMatch engine preset for
your microphone/instrument. If you do not want to use a ToneMatch engine
preset, make sure ToneMatch is set to Flat in the Utility category.

Poor-sounding
playback of a
stereo
recording using
a CD player,
MP3 player or
other such
device.

• Connect the left channel of the device to T1 input channel 4 and the right
channel to T1 input channel 5. Channels 4 / 5 are designed for line-level
inputs.
• Disable any extended bass or EQ features when using CD or MP3 players.
• If you are using recording software on a computer, check the software
  requirements. You may need to configure the software settings for 48kHz /
24-bit operation.

«
...
65
66
67
68
69
...
»

Содержание T1 ToneMatch







































































Отзывы:

Нет отзывов

Похожие инструкции для T1 ToneMatch

Бренд: Farallon Страницы: 26

Бренд: Observint Страницы: 11

Бренд: Harman Kardon Страницы: 66

Бренд: Rolls Страницы: 2

EK-FB GA AX370 Gaming RGB Monoblock

Бренд: ekwb Страницы: 2

Бренд: Cypress Semiconductor Страницы: 11

Magic WiFi mini Ek

Бренд: Devolo Страницы: 22

Бренд: Roland Страницы: 2

Бренд: Realtek Страницы: 30

Бренд: IBASE Technology Страницы: 71

Бренд: Net to Net Technologies Страницы: 4

Бренд: protech Страницы: 95

Бренд: QNAP Страницы: 54

Бренд: Caen Страницы: 14

Бренд: Renesas Страницы: 4

Бренд: SafeHome Страницы: 24

Бренд: Accusys Страницы: 34

HFisolator 9730/26-11

Бренд: Stahl Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды