Bose T1 ToneMatch, Руководство по обслуживанию

Страница: 6 / 70

6
The rear panel provides all input/output connections.
1. IN – Analog input channels 1-3. Accepts XLR balanced cables for microphones, or ¼” TRS
balanced or TS unbalanced cables for high-impedance inputs such as guitars.
2. Preamp OUT – Preamp outputs for channels 1-3. Accepts ¼” TRS balanced or TS unbal-
anced cables.
3. Line IN – Analog input channels 4/5. Accepts ¼” TRS balanced or TS unbalanced cables for
line-level inputs. Can be used for stereo input signals.
4. Aux Output – User-definable analog output. Can be configured for a pre-fader, post-EQ, and
effects, or postfader output. Accepts ¼” TRS balanced or TS unbalanced cables.
5. Master Output – User-definable analog output. Can be configured for a pre- or post-Master
volume analog output. Accepts ¼” TRS balanced or TS unbalanced cables.
6. USB port – A USB interface that allows you to connect the T1 to your computer. This feature
enables you to stream audio to/from your computer, update the T1, and back up performance
scenes.
7. Power switch – Turns the T1 audio engine on or off.
8. ToneMatch
TM
port – A digital output used by the L1
TM
model II system. Also delivers power to
the T1 audio engine from the L1 model II power stand. Accepts the included ToneMatch cable.
CAUTION: Although the ToneMatch port accepts a standard RJ-45 connector, DO NOT connect
the T1 to a computer or phone network. Damage to the T1 could result.
Rear Connection Panel
2
3
6
5
7
1
4
8