62
Before the 1st washing
The washing machine was inspected thoroughly before leaving
the factory. To remove any water left over from testing
procedures, the first washing cycle should be carried out
without
laundry in the machine.
²
The washing machine must have been installed and connected
properly. See chapter
Installing
~
Page 60
1.
Check the machine.
²
Never switch on a damaged machine. Inform your customer
service.
~
Page 49
2.
Fill dispensers
w
/
M
w
.
~
Page 32
3.
Remove protective film from the fascia.
4.
Insert mains plug.
5.
Turn the tap on.
6.
Switch on the appliance.
7.
Close the washing machine door. Do not load any washing.
8.
To prevent unused detergent from flowing into the outlet
during the first wash: Pour 1 litre of water into dispenser
u v
and start the
Drain
programme.
9.
Select and start the
Cottons
90 °C
programme.
10.
When the programme ends, switch off the appliance.
Your washing machine is now ready for use.
Содержание WAY32880TI
Страница 1: ...en Instruction Manual and Installation Instructions Washing machine WAY32880TI ...
Страница 67: ......