Bosch WAY32880TI, Инструкция по эксплуатации и руководство по установке

Страница: 34 / 68

34
The flashing of the associated illuminated display when
intelligent dosage is selected and a corresponding message
on the display panel indicate that the level is below the
minimum. There are still enough contents for approx.
3 washes.
The same detergent or softener can be topped up at any
time. If the product/manufacturer is changed, we recommend
cleaning the dispensers beforehand.
~
Page 41
If required, adjusting the basic dosage.
~
Page 36
Standard settings
Ø
If required, change basic dosages for detergent and softener:
The
basic dosage amount
to be set corresponds:
For detergents – to the manufacturer’s recommendation for
normal soiling and to the particular water hardness.
For
softeners – to the manufacturer’s recommendation for
medium softness and to the particular water hardness.
This information can be found on the package label of the
detergent/softener or ask the manufacturer directly.
To determine the existing water hardness, use a test strip or
check with your water utility company.
My water hardness:
Here is an example of the detergent dosage on a package
label:
²
– Factory setting of the basic dosage: for detergent 75 ml and
for softener 36 ml.
– In the case of more concentrated detergents reduce the
basic dosage amount.
Degree of soiling
ヾ
Water hardness
ゝ
light normal heavy very
heavy
soft/medium 55 ml 75 ml 120 ml 160 ml
hard/very hard 75 ml 95 ml 150 ml 180 ml