Bosch WAY32880TI, Инструкция по эксплуатации и руководство по установке

Страница: 47 / 68

47
Faults, what to do?
Faults Cause/Remedy
Water is running out. – Correctly attach/replace drainage hose.
– Tighten screw-fitting on the supply hose.
Water not flowing in. – Start /Reload
A
not selected?
– Tap not open?
– Filter blocked? Clean the filter.
~
Page 44
– Supply hose kinked or jammed?
Dispenser is empty
and fill level display
is not flashing. – Drawer cover/rear drawer plug dirty?
Cleaning
~
Page 41
– Detergent drawer not inserted correctly? Insert correctly.
~
Page 33
Wrong detergent/
softener has been
poured into
dispenser. Dispensers:
1. Drain and clean dispensers.
2. Refill dispensers.
~
Page 32
Detergent/softener
congealed in the
dispensers. Clean and refill dispensers.
Washing machine
door cannot
be opened. – Safety function active. Stop programme?
–
Rinse Hold
$
(without final spin) selected?
– Can be opened via emergency release only?
~
Page 45
Programme does
not start. – Start /Reload
A
or Finished in time selected?
– Door closed?
– Childlock active? Deactivate.
Detergent solution is
not drained. – Rinse Hold
$
(without final spin) selected?
– Clean the drain pump.
– Clean outlet pipe and/or drainage hose.
Water not visible in
the drum. Not a fault – water below the visible area.
Spin result not
satisfactory.
Washing wet/
too damp. – Not a fault – unbalanced load detection system has stopped
the spin cycle, washing unevenly distributed.
Distribute small and large items of washing in the drum.
– Less Ironing
p
selected?
~
Page 22
– Too low speed selected?
Spin cycle activated
several times. Not a fault – unbalanced load detection system adjusts imbalance.
Residual water in
the dispenser for
care product. – Not a fault – effect of the care product not impaired.
– If required, clean insert.