background image

en

    Installing and connecting the appliance

14

3.

Remove the mains cable from the 

holders.

4.

Remove the sleeves.

5.

Insert cover caps and lock firmly by 

pressing on the locking hook.

Connecting the appliance

Caution!
Material damage/damage to the 

appliance

If the water pressure is too high or 

too low, the appliance may not be 

able to operate properly, and it may 

also result in material damage or 

damage to the appliance.

Make sure that the water pressure in 

the water supply facility is at least 

100 kPa (1 bar), and does not 

exceed 1000 kPa (10 bar).

Material damage/damage to the appliance

If the water hoses are altered or 

damaged, this may result in material 

damage or damage to the 

appliance.

The water hoses must not be kinked, 

crushed, altered or severed.

Material damage/damage to the appliance

The use of hoses supplied by other 

brands to connect to the water 

supply may result in material 

damage or damage to the 

appliance.

Use the hoses supplied with the 

appliance or genuine spare part 

hoses only.

Notes

In addition to the information listed 

here, the local water and electricity 

supplier may have special 

requirements.

If in doubt, have your appliance 

connected by a professional.

Содержание WAN280H1





















































Отзывы: