background image

Display    

en

23

Y

Display

Display

Symbol

Description

Information

E.g. 1:05 

Programme duration

Expected programme duration in hours and minutes.

e.g. 

Š

 kg

Recommended load

Your appliance displays the maximum load depending 

on the selected programme.

N

Wash

lights up:

 Status display

à

Rinse

0

Spin

“Ÿš

End of programme

ª

Display of the buttons 

selected

lights up: 

the corresponding button was pressed and 

the setting has been activated. 

G

SpeedPerfect

SpeedPerfect activated 

F

EcoPerfect

EcoPerfect activated 

~

 and 

Õ

Pause and door

~

 

flashes 

and 

Õ

 

lights up

: Your appliance is in 

pause mode and the door is locked. It is not possible to 

add more laundry. Temperature or water level is too 

high.

Press 

Start/Nachlegen (Start/Pause)

 to resume 

the programme. 

If the temperature is high, start the 

Spülen

 

(Rinse)

 

programme.

If the water level is high, start the 

Schleudern/

Abpumpen (Spin/Drain)

 

programme.

Õ

Door

lights up: 

The door is locked and cannot be 

opened.

flashes: 

The door is not closed properly. 

– Remove any trapped laundry

– Otherwise, switch your appliance off and on 

again and restart the programme. 

~

Pause

flashes: 

Your appliance is in pause mode and the door 

is unlocked. More laundry can be added.

Содержание WAN280H1





















































Отзывы: