Bosch WAE24363BY/01 страница 18 Скачать руководство пользователя

Страница: 18 / 36

Operating the appliance

activate it again as necessary once the

programme has started.

Adding laundry

After starting the programme, you can

add or remove laundry as required.
To do this, press the Start/

Reload

button.
The "Start/Reload" indicator lamp

flashes and the machine checks

whether it is possible to add laundry.

Note:

Do not leave the washing

machine door open for too long when

adding laundry as water from the

laundry may leak out.

If, on the display panel:

■

YES

lights up, it is possible to add

laundry.

■

flashes, wait until

YES

lights up.

■

A flashing

symbol, it is not

possible to add laundry.

For safety reasons, the washing

machine door remains locked when

the water level or temperature is

high, or while the drum is rotating,

and it is not possible to add laundry.

To continue the programme, press

the

Start

/Reload button. The

programme continues automatically.

Changing the programme

If you have started the wrong

programme by mistake, you can

change the programme as follows:

Select the other programme.

Press the

Start

/Reload button. The

new programme starts from the

beginning.

Cancel the programme

For programmes at high temperatures:

To cool the laundry, select

Rinse

Spin.

Press the

Start

/Reload button.

For programmes at low temperatures:

Press Start/

Reload

Select

Rinse

Spin

(deactivate the

Rinse plus/Water plus

button) or

select

Empty

Press the

Start

/Reload button.

Programme end during rinse

hold

- - - appears on the display panel, the

status display lights up and the "Start/

Reload" button indicator lamp flashes.
To end the programme, set the

programme selector to "

Empty

" or

select a spin speed. Then press the

Start

/Reload button.

Programme end

-0-

appears on the display panel and

the "Start/Reload" button indicator lamp

flashes.
If the

symbol also appears on the

display panel, the washing machine has

detected too much foam during the

wash programme and automatically

switched on a rinse cycle to remove the

foam.

Note:

Add less detergent for the next

washing cycle with the same load.

Removing laundry/switching

off the appliance

Open the washing machine door

and remove the laundry.

Turn the programme selector to

Off

Appliance is switched off.

Turn off the water tap.

Note:

Not required for Aqua-Stop

models.

Notes

■

Do not leave any items of laundry in

the drum. They may shrink in the

next wash or discolour another item.

Содержание WAE24363BY/01





































Результаты поиска

Содержание WAE24363BY/01

Отзывы:

Похожие инструкции для WAE24363BY/01

Бренды по названию

Популярные бренды

Bosch WAE24363BY/01, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WAE24363BY/01

Отзывы:

Похожие инструкции для WAE24363BY/01

Бренды по названию

Популярные бренды