Faults and what to do about them.
en
23
If possible, leave it to cool down.
:
Warning
Risk of injury!
You may injure your hands if you reach
into the drum while it is rotating.
Do not reach into the drum while it is
rotating.
Wait until the drum has stopped
rotating.
Caution!
Water damage
Any escaping water may cause water
damage.
Do not open the washing machine door
if water can be seen through the glass.
1.
Switch off the appliance. Pull out the
mains plug.
2.
Drain off the detergent solution
3.
Use a tool to pull the emergency
release downwards and release it.
The washing machine door can then
be opened.
Information on the display panel
Display
Cause/remedial action
YES
The washing machine door is unlocked. It is possible to add laundry.
NO
■
Temperature too high. Wait until the temperature drops.
■
Water level too high. Not possible to add laundry. Close the washing machine
door immediately, if necessary. Select
Start
/Reload to continue the pro-
gramme.
NO flashes
■
Wait until
YES
lights up.
F:16
Close the door properly; laundry may become trapped.
F:17
■
Turn the water tap on fully,
■
supply hose kinked or trapped,
■
water pressure too low. Clean the screen.
F:18
■
Detergent solution pump blocked. Clean detergent solution pump.
■
The drain hose/waste pipe is blocked. Clean the drain hose on the siphon.
F:21
Motor fault. Call the after-sales service.
F:23
Water in the base tub, appliance leaking. Call the after-sales service.
E
Childproof lock activated; deactivate it.
N
flashes
Too much foam detected, a rinse cycle has been switched on.
