Sensors
en
19
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
H
Sensors
Sen
sor
s
Automatic load sensing
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note:
Place large and small items of
laundry in the drum (from
M
Setting the signal
Set
ti
ng
the
si
gna
l
1. Activate the setting mode for the signal volume
Set to
Ú
One step, the display
panel lights up
Select and hold
One step, release
2. Set the volume for the button signals and information signals (depending on the model)
* you may need to
select the function sev-
eral times.
Set the vol-
ume*
skip
One step
Set the volume*
Set to
Ú
