background image

en

    Operating the appliance

16

The settings can be selected or 

deselected depending on the 

programme progress. 
The indicator lamp for the button lights 

up if a setting is active.
The settings are not saved when the 

appliance is switched off.
Additional settings 

~

 Page 14

Overview of programmes from 

~

 Page 12

Placing laundry into the drum

:

Warning

Risk of death!

Items of laundry pretreated with 

cleaning agents that contain solvents, 

e.g. stain remover/cleaning solvent, 

may cause an explosion after being 

loaded into the washing machine.

Hand-rinse these items of laundry 

thoroughly beforehand.

Notes

Mix items of laundry of varying sizes. 

Laundry items of different sizes 

distribute themselves better during 

the spin cycle. Individual items of 

laundry may lead to imbalances. 

Observe the maximum specified 

load. Overfilling has a negative 

impact on the washing result and 

promotes creasing.

1.

Place presorted items of laundry 

unfolded in the washing drum.

2.

Make sure that no items of laundry 

are trapped between the washing 

machine door and the rubber seal, 

and close the door.

The "Start/Reload" button indicator lamp 

flashes and the programme settings 

continue to be displayed on the display 

panel one after another. It is possible to 

change the settings.

Measure and add detergent 

and care products

Caution!

Damage to the appliance

Cleaning agents and agents for 

pretreating laundry (e.g. stain removers, 

prewash sprays, etc.) may cause 

damage if they come into contact with 

the surfaces of the washing machine. 

Do not allow these agents to come into 

contact with the surfaces of the washing 

machine. If necessary, immediately wipe 

away spray residue and other residues/

droplets with a damp cloth.

Measuring

Measure the detergent and care 

products according to:

Water hardness (ask your water 

supply company)

The manufacturer's instructions on 

the packaging

The amount of laundry

Soiling 

~

 Page 11

Filling

:

Warning

Eye/skin irritation!

Detergent and care products may spray 

out if the detergent drawer is opened 

while the machine is in operation.

Open the drawer carefully.

Rinse eyes or skin thoroughly if they 

come into contact with detergent/care 

products.

If swallowed accidentally, seek medical 

advice.

Note:  

Dilute viscous fabric softener and 

fabric conditioner with water; this 

prevents blockages.

Содержание WAE24363BY/01





































Отзывы: