background image

1 689 989 106

2012-09-10

Robert Bosch GmbH

 Product description  |  VLS 3130  |  25

en

5.2 Authorized 

users

Only users aged 18 or above who have been instructed 
on how to operate the lifting platform and have proven 
their ability to do so to the owner are to be entrusted 
with unsupervised operation of lifting platforms. The 
task of operating the lifting platform must be expressly 
assigned to users by the owner. Authorization to 
operate lifting platforms must be granted in writing.

Before loading a vehicle onto the lifting platform, users 
should study the original operating instructions and 
familiarize themselves with the operating procedures in 
several trial runs.

5.3 

Preparation by the user

5.3.1 Space 

requirements

Refer to Appendix A for the dimensions of the lifting 
platform.
There must also be a clearance of at least 1 meter 
between the lifting platform and fixed elements 
(e.g. wall) in all lifting positions.
There must be sufficient space at the ends of the lifting 
platform for driving vehicles on and off.

 

i

To stop vehicles colliding with the ceiling, it is 
advisable to fit an overhead light barrier in low-
ceilinged buildings.

5.3.2 

Foundation and connections

The user must have the following work performed 
before erecting the platform:

 

Construction of the foundation following 
consultation with Bosch customer service or an 
authorized service agent.

 

Routing of the wiring to the installation location. 
The user must provide fuse protection for the 
connection.

 

Routing of the compressed air connection to the 
installation location. The user must install a service 
unit upstream of the connection.

 

i

Refer also to the corresponding information in the 
commissioning instructions.

5.4 Transportation 

information

The lifting platform is delivered as follows:

Packing unit

Dimensions

Weight

1 x pallet

1820 x 1545 x 450 mm 
(6.0 x 5.0 x 1.5 feet)

750 kg
(992 lb)

The user must provide a forklift truck for internal 
transport. The center of gravity and lashing points are 
marked on the packaging.

X

Fig. 1: 

Center of gravity of packaging (example)

5.5 

Set-up and initial commissioning

The lifting platform is only to be started up by Bosch 
customer service or an authorized service agent. Initial 
commissioning of the lifting platform is described in the 
installation instructions. Acceptance must be performed 
by a qualified person after initial commissioning.

5.6 

Scope of delivery

Description

Order no.

Lifting platform VLS 3130, complete

1 692 852 301

20 mm elastomer retainers (x 4)

1 692 872 361

Original instructions

1 689 989 106

Test log book

1 689 977 092

5.7 Special 

accessories

Description

Order no.

Mobile set (1 draw bar, 2 running rollers)

1 692 871 301

Information on additional special accessories is 
available from your authorized Bosch dealer.

Содержание VLS 3130


















Отзывы: