background image

1 689 989 106

2012-09-10

Robert Bosch GmbH

 30  |  VLS 3130  |  Operation

en

6.6 

Lowering the vehicle

DANGER – Risk of vehicle falling or tipping!

Risk of (fatal) injury when lowering the support 
arms and the vehicle.

 

Ensure that the elastomer retainers are 
firmly affixed to the lifting points.

 

Avoid jerky movements of the vehicle and 
lifting platform.

DANGER – Risk of crushing when lowering 
the lifting platform!

Risk of (fatal) injury when lowering the lifting 
platform.

 

Make sure that there are no persons in 
the vehicle or in the vicinity of the lifting 
platform.

 

Ensure that there are no objects in the 
vicinity of the lifting platform.

 

Keep a safe distance from the lifting 
platform.

1. 

Remove unsecured tools and other objects from the 
vehicle and the lifting platform.

2. 

Turn the rotary reversing switch to "lowering" (

u

and hold it in this position.

 

The lifting tables move downward as long as the 
button is pressed.

 

Lowering of the running rail is stopped 
automatically at a height of 300 mm ("foot 
protection" safety level).

3. 

Check the area beneath the running rail.

4. 

If it is safe to do so, press and hold the "foot 
protection" confirmation button.

5. 

Turn the rotary reversing switch to "lowering" (

u

again and hold it in this position.

 

A warning signal sounds and the lifting platform 
moves down to its lowest position.

 

"

The lifting platform and vehicle are now fully 
lowered.

6.7 

Driving the vehicle off

1. 

Make sure that the lifting platform is fully lowered.

2. 

Remove the elastomer retainers.

3. 

Lower the access ramps.

4. 

Ensure that the exit area is unobstructed.

5. 

Drive the vehicle off the lifting tables in a straight 
line.

 

"

The lifting platform is now empty.

6.8 Deactivation

1. 

Use a padlock to secure the rotary reversing switch 
in the OFF position (O).

 

"

The lifting platform is deactivated and locked.

Содержание VLS 3130


















Отзывы: