Bosch VLS 3130, Оригинальное руководство пользователя

Страница: 16 / 17

1 689 989 106 2012-09-10
|
Robert Bosch GmbH
34 | VLS 3130 | Decommissioning en
9.5.2 Maintenance schedule
Daily Monthly Half-y
early
Component Activity
x x x Stickers Visual inspection:
All stickers must be present
and clearly legible.
x x x Access ramp Visual inspection:
Components must not be
damaged. Check locking.
x x x Electrical wiring Visual inspection:
No damage to insulation.
x x x Hydraulic system Visual inspection:
No escape of fluid.
x x Exposed surfaces
and edges Cleaning:
Clean all contaminated surfaces
and apply preservative agent if
applicable.
x x Exposed surfaces
and edges Paint care:
Sand down paint blemishes
with sand paper (grain size
120) and touch up with the
appropriate RAL shade.
x x Microswitch
(foot protection) Function test:
Raise and lower the lifting
platform.
x Hydraulic unit Check fluid level in tank:
With the lifting platform fully
lowered, the tank must be filled
up to the "MIN" marking.
Top up with the specified
hydraulic fluid if necessary.
x Moving
components Check lubrication:
Lubricate all moving
components as per lubrication
chart.
x Shear connectors Check the tightening torque.
Re-tighten to a torque of 50 Nm
if necessary.
10. Decommissioning
10.1 Temporary shutdown
In the event of lengthy periods of non-use:
Disconnect the VLS 3130 from the mains.
Lock the rotary reversing switch.
10.2 Change of location
If the VLS 3130 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
The VLS 3130 is only ever to be transported in the
original or equivalent packaging.
Unplug the electrical connection.
Heed the notes on initial commissioning.
10.3 Disposal and scrapping
10.3.1 Substances hazardous to water
!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1.
Substances hazardous to water must not be allowed
to enter the sewage system.
2.
Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
10.3.2 VLS 3130 and accessories
1.
Disconnect the VLS 3130 from the mains and detach
the power cord.
2.
Dismantle the VLS 3130 and sort out and dispose
of the different materials in accordance with the
applicable regulations.
The VLS 3130 is subject to the European
directive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Make use of the local return and collection
systems for disposal.
Proper disposal of the VLS 3130 prevents
environmental pollution and possible
health hazards.