Bosch VG4-A-9543, Руководство по установке

Страница: 14 / 52

14 en | Installing the Pipe Mount AutoDome Pipe Mount
F.01U.251.410 | 1.0 | 2011.08 Installation Guide Bosch Security Systems, Inc.
2.4.1 Attach Cover Door
1. Compress the bottom hinge pin by pushing the pin lever
down and then rotate it behind the Hinge Pin Stop. The
power box Cover Door provides a Hinge Pin Stop to hold
the bottom hinge open while attaching the door.
Figure 2.2 Align Cover Door Hinge to Power Box
2. Open the top hinge by pushing its pin lever outward and
holding it open.
Note: Both Hinge Pins must be fully compressed to open
(unlock) the female hinges of the Cover Door before
proceeding to the next step.
3. While holding the top hinge pin open, position the Cover
Door to the Power Supply Box and align its hinges.
4. When the hinges are aligned, release the top hinge pin to
engage its mating hinge on the power box. Then release
the bottom hinge pin from the Hinge Pin Stop to complete
attaching the Cover Door to the Power Supply Box.
1 Power Supply Box 5 Hold Hinge Pin Open
2 Cover Door 6 Open Position
3 Align Top Hinge 7 Hinge Pin Stop
4 Align Bottom Hinge
GND T XD R XD C+ C- GND T XD R XD C+ C-
(FUSE
)
(FUSE
)
(FUSE
)
24V NC 24V
90
o
HTR DOME
NOTICE!
After all wiring is complete, close the cover door and tighten
the two (2) captive screws on the cover door to 10-12 N-m (90-
105 in.-lbs) to ensure the Power Supply Box is watertight.