Bosch TCA640 Series Скачать руководство пользователя страница 16

Страница: 16 / 95

58300000120060_ARA_en_c.doc – 18.09.09

Seite 16 von 95

3.5.4.2

Changing the water filter

►

The appliance must be
switched on and ready to use.

►

Place a vessel with a capacity
of at least 500 ml under the hot
water nozzle.

►

Using the screwing aid,
unscrew the water filter in an

anti-clockwise

direction.

►

Screw in a new water filter.

►

Press and hold down button

for at least

3 sec.

►

Select

FILTER YES/NEW

with the arrow buttons.

►

Press button

to save the setting.

►

Press

exit

button to return to brewing mode.

►

Press function switch to draw hot water. The appliance rinses
the filter automatically. Water is conveyed into the collecting
vessel (approx. 2 minutes). The water may be a little cloudy,
do not drink it!

►

If the system message

PRESS WATER

is displayed, press

the function switch again.

The appliance is ready for use.

3.5.4.3

Removing the water filter

►

The appliance must be
switched on and ready to use.

►

Using the screwing aid,
unscrew the water filter in an

anti-clockwise

direction.

►

Press and hold down button

for at least

3 sec.

►

Select

FILTER YES/NEW

with the arrow buttons.

►

Press button

until the display flashes.

►

Select

FILTER NO/OLD

with the arrow buttons.

►

Press button

to save the setting.

►

Press

exit

button to return to brewing mode.

The appliance is ready for use again.

Check water hardness setting.

Содержание TCA640 Series
































































































Результаты поиска

Содержание TCA640 Series

Отзывы:

Похожие инструкции для TCA640 Series

Бренды по названию

Популярные бренды

Bosch TCA640 Series, Инструкция по ремонту

Результаты поиска

Содержание TCA640 Series

Отзывы:

Похожие инструкции для TCA640 Series

Бренды по названию

Популярные бренды