Bosch TCA640 Series Скачать руководство пользователя страница 22

Страница: 22 / 95

58300000120060_ARA_en_c.doc – 18.09.09

Seite 22 von 95

3.6.4

Heating up drinks with steam

Warning!

Risk of scalding! Risk of burns!

►

When the steam button is pressed, some
steam may spray out.

►

Escaping steam is very hot!

►

Do not touch the frothing nozzle or point it
at anybody!

(1)

Rotate the dial to the middle

position.

(2)

Immerse the frothing nozzle

deep into the liquid which is to
be heated.

(3)

Press the steam button.

The appliance heats up for
approx. 15 seconds to steam
temperature. Then the steam is
conveyed and the liquid is
heated.

End the process by pressing the
steam button again.

Note:

After using the appliance, always clean the frothing
nozzle. Dried residue is very difficult to remove.

3.6.5 Preparing

hot

water

Warning!

Risk of scalding! Risk of burns!

►

When the hot water button is pressed, some
hot water may spray out.

►

Do not touch the frothing nozzle or point it at
anybody!

(1)

Rotate the dial to the middle

position.

Place a suitable cup or glass
under the frothing nozzle.

(3)

Press hot water button, fill

cup or glass.

End the process by pressing the
hot water button again.

Содержание TCA640 Series
































































































Результаты поиска

Содержание TCA640 Series

Отзывы:

Похожие инструкции для TCA640 Series

Бренды по названию

Популярные бренды

Bosch TCA640 Series, Инструкция по ремонту

Результаты поиска

Содержание TCA640 Series

Отзывы:

Похожие инструкции для TCA640 Series

Бренды по названию

Популярные бренды