Troubleshooting
en-us
35
3
Troubleshooting
Troubleshooting
Dishwashers may occasionally
exhibit problems that are unrelated to
a malfunction of the dishwasher itself.
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Dishwasher
does not start
Door may be ajar or not be properly
latched.
Close door securely until door latch clicks.
No power to the dishwasher
(display won’t come on). Fuse may
have been blown, circuit breaker
may have tripped, power cord may
have been unplugged or
dishwasher may have been turned
off.
Replace blown fuse or reset tripped circuit
breaker. Plug power cord into outlet
securely. Press the on/off button
(
to
turn the dishwasher on.
Can’t select a wash cycle since the
previous wash cycle may not have
finished or the dishwasher hasn’t
been reset.
Reset the dishwasher by pressing and
holding the START button for at least three
Delay start or Child lock may be
activated.
Reset Delay start or Child lock functions
(refer to the appropriate section in this
manual).
The door may have been closed
without selecting a wash cycle.
Select a wash cycle and close the door.
Water supply may not be turned on
or connected.
Check and turn on water supply.
Wash cycle
won’t resume
after door was
opened and
closed.
The door has been open for more
than 4 seconds after pressing the
Start
button.
Press
Start
button again and close the
dishwasher door within 4 seconds (see
“Protection against unintentional operation”
section in this manual).
Display does
not illuminate
A fuse may have been blown or
circuit breaker tripped.
Check the fuse or circuit breaker box and
replace the fuse or reset the breaker if
necessary.
Door not closed or latched.
Note:
For models with controls on
top of the door, the display only
illuminates when the door is opened
and controls are visible.
Ensure door is properly latched and
completely closed.
Содержание SHPM78W54N
Страница 2: ...2 ...