RE 51150-B/07.11 | Drive modules
Bosch Rexroth AG
5/
56
About this documentation
About this documentation
1
Validity of the documentation
1.1
This documentation applies to the following products:
Clamping and drive module UPE2
•
Drive module UPE5
•
This documentation is intended for assembly fitters, service technicians and
plant operators.
This documentation contains important information on the safe and appropriate
transport and assembly, commissioning, maintenance, disassembly and simple
troubleshooting of clamping and drive modules and drive modules with and with-
out control modules, hereinafter only referred to as "drive module".
Read this documentation completely, especially chapter 2 "General safety
f
instructions" before working with the drive module.
Necessary and amending documentation
1.2
These are general operating instructions pertaining to drive modules that have
been designed and manufactured to customer specifications.
For this reason you should keep the general and product-specific documenta-
f
tion to hand when reading these instructions (see Chapter 4 "Scope
of delivery").
You should observe the documentation for the complete machine.
f
You should also observe the documentation pertaining to the other compo-
f
nents, assemblies and partly completed machinery, which form part of the
complete machinery.
The drive module may not be commissioned until you are provided with the
f
documentation marked with the book symbol
, which applies to your or-
dered drive module and have understood and observed it.
Necessary and amending general documentation
Table 1:
Title
Document number
Document type
Clamping and drive module UPE2
51142
Data sheet
Drive module UPE5
51145
Data sheet
Control module IH15A
51144
Data sheet
Control module IH15B
51156
Data sheet
Hydraulic fluids on mineral oil
basis and related hydrocarbons
90220
Data sheet
You can find these operating instructions as well as related documents in the
media directory under
www.boschrexroth.com/various/utilities/mediadirectory/
