Bosch Rexroth UPE2 Скачать руководство пользователя страница 13

Страница: 13 / 56

RE 51150-B/07.11 | Drive modules

Bosch Rexroth AG

13/

General warnings of damage to property and damage to the product

General warnings of

damage to property

and damage to the product

NOTICE

Danger due to improper handling!

Damage to property!

The product may only be operated according to section 2.2 "Intended use".

Do not hit against areas relevant for the functioning (e.g. sealing surfaces)

and attachment parts (e.g. control, accumulator, valves).

Mixing hydraulic fluids!

Damage to property!

Any mixing of hydraulic fluids of different manufacturers and/or of different

types of the same manufacturer is generally not admissible.

Pollution by fluids and foreign bodies!

Early wear and malfunctions!

Take the following measures for protecting the drive module:

During assembly, provide for cleanliness in order to prevent foreign bodies

e.g. welding beads or metal chips from getting into the hydraulic lines and

causing product wear or malfunctions.
Make sure that all connections, hydraulic lines and attachment parts

(e.g. measuring instruments) are clean and free of chips.
For removing lubricants or any other heavy pollution, use industrial residue-

free wipes.
Before commissioning, ensure that all hydraulic and mechanical connections

are connected.
During filling, filter the hydraulic fluid using a suitable filter system in order to

minimize the solid particle contamination and water in the system.

Improper cleaning!

Damage to property!

Cover all openings with the appropriate protective plugs in order to prevent

cleaning agents from penetrating the system.
Check that all seals and electrical plug-in connections are firmly fitted to

prevent the penetration of cleaning agents.
Do not use aggressive cleaning agents for the cleaning. Clean the drive mod-

ule using a suitable cleaning liquid.
Do not use a pressure washer.

Operation with a lack of hydraulic fluid!

Damage to property!

Observe the data sheet specifications regarding the point "Control of the

hydraulic fluid" and the prescribed remedial measures for the control result.

Содержание Rexroth UPE2

























































Результаты поиска

Содержание Rexroth UPE2

Отзывы:

Бренды по названию

Популярные бренды

Bosch Rexroth UPE2, Общие инструкции по эксплуатации

Результаты поиска

Содержание Rexroth UPE2

Отзывы:

Бренды по названию

Популярные бренды