Bosch Rexroth UPE2 Скачать руководство пользователя страница 11

Страница: 11 / 56

RE 51150-B/07.11 | Drive modules

Bosch Rexroth AG

11/

Safety instructions

CAUTION

Danger due to insufficient fastening!

Risk of injury!

Always ensure a vertical installation position (UPE2).

Fasten the product using all screws according to the connection dimensions

specified in the relevant data sheet.

Hazard due to incorrect connection of the control and supply lines!

Unforeseeable reactions, risk of injury!

Ensure that only trained specialists are commissioned with the assembly.

Observe the circuit diagrams located at the device when assembling

the product.

Safety equipment

2.7

Make sure that all safety devices belonging to the drive module are present,

•

have been installed properly and are fully functional. Do not displace, bypass or

disable safety equipment.
If it should be necessary to disable any safety equipment temporarily, for

•

example for commissioning or maintenance work, always take the appropriate

measures to ensure that no hazard to a person's life or health or to property

may occur. Also observe the superordinate operating instructions for the ma-

chine or system.

Obligations of the machine manufacturer

2.8

In order to ensure safety when handling the drive module, the manufacturer of the

machine must:

Select the safest installation position for the drive module possible in order to

•

avoid possible damage of the drive module.
Provide for sufficient protection of the drive module including all attachment

•

parts depending on the selected installation position in order to avoid possible

damage of the drive module and its attachment parts.
Prescribe the wearing of personal protective equipment or perform suitable

•

protection measures in order to reduce the risk of collision, the risk of hear-

ing damage and the risk of burns at hot surfaces for operating or maintenance

personnel.
Label the hydraulic components according to the specifications of

•

EN 982, 7.3 et sqq.
Take suitable protective measures in order to reduce the slip hazard caused by

•

oily surfaces around the drive module.

Содержание Rexroth UPE2

























































Результаты поиска

Содержание Rexroth UPE2

Отзывы:

Бренды по названию

Популярные бренды

Bosch Rexroth UPE2, Общие инструкции по эксплуатации

Результаты поиска

Содержание Rexroth UPE2

Отзывы:

Бренды по названию

Популярные бренды