Bosch rexroth SB24 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 78

background image

General instructions on property damage and product damage 15/78

RE 66170-B/2019-05-15, Control block SB24/34, Bosch Rexroth AG

NOTICE

Mixing hydraulic fluids!

Product can be damaged!

▶

Observe the viscosity and cleanliness level specified in the data sheet for
hydraulic fluids.

▶

Mixture of different hydraulic fluids can lead to damage at the control
block/control block segment due to chemical reactions and changes in
properties.

▶

Ensure compatibility of different hydraulic fluids according to manufacturer's
specifications.

Contamination of hydraulic fluid!

The cleanliness of the hydraulic fluid has a considerable impact on the service life
of the product. Contaminations of the hydraulic fluid may lead to premature wear
and malfunctions!

▶

Make sure that the working environment at the installation site is fully free of
dust and foreign substances in order to prevent foreign particles from getting
into the hydraulic lines and causing product wear and malfunctions. The control
block/control block segment must be installed in a clean condition.

▶

Only use clean ports, hydraulic lines and attachments (e.g. measuring devices).

▶

When plugging the ports, no contamination may ingress.

▶

Before commissioning, ensure that all hydraulic connections are tight and
that all seals and plugs of the plug-in connection are correctly installed and
undamaged to prevent fluids and foreign particles from entering the product.

Improper cleaning

Product can be damaged!

▶

Plug all openings with suitable protective devices to prevent cleaning agents
from entering the product.

▶

Never use solvents or aggressive cleaning agents. Use only water and, if
necessary, a mild cleaning agent to clean the product.

▶

Do not point high-pressure cleaners at sensitive components, e.g. rubber parts,
electrical connections (solenoids and sensors), and actuation elements.

▶

Use fiber-free cleaning cloths for cleaning.

Environmental pollution due to incorrect disposal!

Careless disposal of the control block/control block segment and its attachments,
the hydraulic fluid and the packaging material can cause environmental pollution!

▶

Dispose of the control block/control block segment, hydraulic fluid, and
packaging in accordance with the national regulations in your country.

▶

Dispose of the hydraulic fluid in accordance with the applicable safety
data sheet of the hydraulic fluid.

«
...
13
14
15
16
17
...
»

Содержание rexroth SB24















































































Отзывы:

Нет отзывов

Похожие инструкции для rexroth SB24

Бренд: Data I/O Страницы: 88

Бренд: Data Aire Страницы: 13

Бренд: ICP DAS USA Страницы: 166

Бренд: ICP DAS USA Страницы: 64

Tunnel Master Jr

Бренд: ICS Страницы: 83

PROFIBUS PROFI-2510

Бренд: ICP DAS USA Страницы: 4

Бренд: ICP DAS USA Страницы: 40

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 4

Бренд: Olsberg Страницы: 68

Бренд: Ultratec Страницы: 33

Бренд: AUMA Страницы: 24

Бренд: VALSTEAM ADCA Страницы: 4

Бренд: WABCO Страницы: 3

972LM Security?

Бренд: Chamberlain Страницы: 4

Бренд: FUTABA Страницы: 6

Commander Site Controller

Бренд: VeriFone Страницы: 34

Бренд: D+H Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды