Bosch rexroth SB24 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 78

background image

12/78

Safety instructions

Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15

WARNING

System/machine under pressure!

Danger to life or risk of injury, severe bodily injury when working on machines
which have not been put to a standstill! Property damage!

▶

Switch off the entire system and secure it against reactivation according to the
parameters provided by the machine/system manufacturer.

▶

Ensure that all relevant components of the hydraulic system are depressurized.
For this purpose, observe the parameters indicated by the machine/
system manufacturer.

▶

Please note that the hydraulic system might still be pressurized event after
separation from the actual pressure supply.

▶

Do not disconnect any line connections, ports or components as long as the
hydraulic system is under pressure.

Escaping hydraulic fluid mist!

Risk of explosion and fire hazard, health hazard, risk of environmental pollution!

▶

Depressurize the relevant machine/system component and repair the leak.

▶

Keep open flames and ignition sources away from the control block/control
block segment.

▶

If control blocks/control block segments are located in the vicinity of ignition
sources or powerful thermal radiators, a shield must be erected to ensure
any escaping hydraulic fluid cannot be ignited, and to protect hose lines
from premature aging.

Electrical voltage!

Danger to life or risk of injury due to electric shock or property damage!

▶

Always disconnect the voltage supply to the relevant machine/system part
before installing the product and/or connecting or disconnecting the connector.

▶

Protect the machine/system against being re-energized.

Disturbance of control functions due to contamination!

Risk of injury or property damage!
Under certain circumstances, moving parts in control equipment
(e.g. control spool) can get stuck in an undefined position due to contamination
(e.g. impure hydraulic fluid, abrasion or residual dirt from components). As
a result, the activated consumer does no longer respond correctly to the
operator’s specifications.

▶

Comply with the prescribed cleanliness level of the hydraulic fluid in
accordance with the data sheet.

Danger caused by pressurized, leaking hydraulic fluid!

Risk of death or injury due to leaking hydraulic fluid streams! Leakage at the
control block/control block segment can lead to hydraulic fluid escaping under
high pressure.

▶

Depressurize the relevant machine/system component and repair the leak.

▶

Never attempt to block or seal the leak or hydraulic fluid jet with a cloth.

«
...
10
11
12
13
14
...
»

Содержание rexroth SB24















































































Отзывы:

Нет отзывов

Похожие инструкции для rexroth SB24

Бренд: Vacon Страницы: 62

Бренд: Mackie Страницы: 16

Бренд: TANDBERG Страницы: 47

Бренд: Parker Страницы: 54

Бренд: RAM Страницы: 71

AMES 4000SS Series

Бренд: Watts Страницы: 8

Бренд: SYCLOPE electronic Страницы: 40

Бренд: Timotion Страницы: 10

SAE 07.2 Series

Бренд: AUMA Страницы: 116

WisLink LPWAN RAK5146

Бренд: RAKwireless Страницы: 9

CURTIS DC Series

Бренд: NOCO Genius Страницы: 2

Бренд: TimeTec Security Страницы: 2

Бренд: Xylem Страницы: 2

LOWARA Aquavara IPC

Бренд: Xylem Страницы: 292

Бренд: LAB-EL Страницы: 25

Бренд: Cardigo Страницы: 12

Бренд: Riello Страницы: 72

Бренд: schmersal Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды