Bosch rexroth SB24 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 78

background image

10/78

Safety instructions

Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15

2.3 Improper use

Any use other than that described as intended use is considered improper.
Bosch Rexroth AG is not liable for damages resulting from improper use. The user
is solely responsible for any risks arising from improper use.
The following foreseeable forms of faulty usage are also considered improper
(this list is not exhaustive):

• Use outside the operating parameters approved in the data sheet or in the order

confirmation (unless specifically approved by the customer)

• Use of non-approved fluids, e.g., water or polyurethane components

• Application of the control block/control block segment in potentially explosive

environments

2.4 Personnel qualifications

The activities described in this documentation require a basic understanding of
mechanics, electricity and hydraulics, as well as familiarity with associated technical
terms. For transporting and handling the product, knowledge regarding the use of
lifting gear and lifting accessories is required. Skilled personnel refers to persons
who possess the professional training, knowledge and experience, as well as the
understanding of the regulations relevant to the work to be done that are necessary
to recognize possible dangers and take the appropriate safety measures. Skilled
personnel must follow the rules relevant to their field and have the necessary
hydraulic expert knowledge.
Hydraulic expert knowledge includes:

• Being able to read and fully understand hydraulic circuit diagrams and

• Knowledge regarding the function and interaction of hydraulic components.

Bosch Rexroth offers you measures supporting training in specific areas. For an
overview of the training contents, visit our website under:

www.boschrexroth.com/training

2.5 General safety instructions

• Observe applicable accident prevention and environmental protection regulations.

• Observe the safety regulations of the country in which the product is

used/operated.

• For Germany, the following applies: Hydraulic machinery/systems are "facilities for

handling substances hazardous to water in accordance with the German Federal
Water Act (WHG)". Sections 1 and 19 WHG (§19g, 19i, 19l) in particular must be
complied with in this respect.

• Use Rexroth products only when they are in good working order.

• Do not install, operate, remove or maintain Rexroth products if under the influence

of alcohol, drugs or medication that may affect your reaction time.

«
...
8
9
10
11
12
...
»

Содержание rexroth SB24















































































Отзывы:

Нет отзывов

Похожие инструкции для rexroth SB24

ServeRAID M5014

Бренд: IBM Страницы: 106

Бренд: Jäger Страницы: 50

Бренд: Laird Страницы: 38

Бренд: Laird Страницы: 5

Бренд: Lawler Страницы: 4

Бренд: QTP Страницы: 2

Бренд: ZKTeco Страницы: 6

Бренд: Matelec Страницы: 16

Бренд: GSD Страницы: 5

Бренд: Comunello Страницы: 13

AS-Interface AS-i Series

Бренд: IFM Electronic Страницы: 25

Бренд: adept technology Страницы: 96

GL8-GL8000M3-RCA-3.0

Бренд: Balboa Instruments Страницы: 9

Бренд: C&T Страницы: 71

Бренд: aldes Страницы: 3

Бренд: Prozeda Страницы: 12

Бренд: GRAUPNER Страницы: 76

Бренд: Datavideo Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды