Bosch rexroth SB24 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 78

background image

16/78

General instructions on property damage and product damage

Bosch Rexroth AG, Control block SB24/34, RE 66170-B/2019-05-15

NOTICE

Danger due to chemical or aggressive environmental conditions!

Product can be damaged! If the control block/control block segment is exposed to
chemical or aggressive environmental conditions, corrosion and even malfunctions
may occur. Leaks may lead to a leakage of hydraulic fluid.

▶

Take suitable measures for protection of the control block/control block
segment against chemical and aggressive environmental conditions.

Escaping hydraulic fluid!

Environmental pollution and contamination of the ground water!

▶

When filling and draining hydraulic fluid, always place a drip tray under the
control block/control block segment.

▶

Use a suitable binding agent to collect any leaked hydraulic fluid.

▶

Observe the safety data sheet for the hydraulic fluid and the specifications
provided by the machine/system manufacturer.

Danger due to heat development in components!

Adjacent products may be damaged! Due to a heat development in components
(e.g. solenoids), adjacent products may be damaged during assembly if no
sufficient safety distance is complied with.

▶

When installing the control block/control block segment, check the distances to
nearby products to prevent any damage.

The warranty exclusively applies to the delivered configuration.
The warranty claim becomes void with

• Faulty installation, commissioning and operation,

• Improper use,

• Removal of the tamper-proof caps and seals (e.g. with pressure settings),

• Control of the settings at the factory,

• Unauthorized conversions and additional installations,

• Opening of the directional valve,

• Improper handling,

• Use of non-original spare parts by Rexroth.

«
...
14
15
16
17
18
...
»

Содержание rexroth SB24















































































Отзывы:

Нет отзывов

Похожие инструкции для rexroth SB24

Бренд: CALEFFI Страницы: 2

Бренд: CALEFFI Страницы: 12

Бренд: Caliber Страницы: 6

Бренд: Data I/O Страницы: 88

Бренд: Data Aire Страницы: 13

Бренд: FATEK Страницы: 10

Бренд: Kamstrup Страницы: 36

Бренд: JFA Electronicos Страницы: 29

Бренд: M-Audio Страницы: 26

Бренд: M Climate Страницы: 12

Бренд: National Instruments Страницы: 102

Бренд: NAU ROBOTICS Страницы: 109

Maschine Mikro MK2

Бренд: Native Instruments Страницы: 181

Бренд: IN-COMMAND Страницы: 47

Бренд: SYCLOPE Страницы: 60

Бренд: MX Страницы: 12

Бренд: Elfa Страницы: 22

Бренд: Tripp Lite Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды