Bosch Rexroth M SED 6 VE1 Series, Руководство пользователя

Страница: 21 / 40

3 /20 RA 22049-VE1-B2 | M-.SED 6...VE1... Hydraulics | Bosch Rexroth AG
2.1 Conventions in this product information
Cross-references are shown in italic.
DANGER
This symbol indicates an imminent danger which will
immediately result in most serious bodily injuries or
death unless it is avoided.
WARNING
This symbol indicates an imminent danger which can
result in most serious bodily injuries or death unless it
is avoided.
CAUTION
This symbol indicates a possible danger which can
result in minor or serious bodily injuries and/or damage
to property.
IMPORTANT
This symbol refers to additional information.
3 Responsibilities
3.1 Liabilities and warranty
Bosch Rexroth AG shall not be liable for any damages
resulting from nonobservance or incomplete observance of
these operating instructions.
In case of unauthorized changes the warranty becomes
invalid.
Bosch Rexroth shall only be liable if the delivery was faulty.
Bosch Rexroth shall not be liable if faults are caused by the
customer replacing parts with parts that are similar but not
the identical parts prescribed by the manufacturer.
For further details on the warranty and manufacturer's
warranty, please refer to our general terms of delivery or
your contract documents.
3.2 Responsibilities of the machine end-
user/user
The hydraulic fluid on mineral oil basis is water-polluting
and inflammable.
It may only be used if the corresponding safety data sheet
of the manufacturer is available and all measures prescribed
therein have been realized.
If leakage at the valve can lead to water or soil contamina-
tion, the valve must be put into a suitable collecting pan.
The machine end-user is responsible for:
➢
The valve only being used according to the intended use
as defined in these operating instructions.
➢
The valve only being used in such a way that the techni-
cal data, operating and environmental conditions stated
in these operating instructions are complied with. In par-
ticular the limit values stated in the data sheet may not
be exceeded if humanly possible and in compliance with
the operating instructions.
➢
The applicable provisions and directives on explosion
protection being complied with.
If the valve is a component of another product, e.g. of
a hydraulic system, the person responsible for this other
product (e.g. the designer / system constructor) shall
make sure
➢
that the valve is only used according to the intended use
as defined in these operating instructions.
➢
that the valve is only used in such a way that the techni-
cal data, operating and environmental conditions stated
in these operating instructions are complied with. In par-
ticular the limit values stated in the data sheet may not
be exceeded if humanly possible and in compliance with
the operating instructions.
➢
that the applicable provisions and directives on explosion
protection are complied with.
1 Scope of delivery
For the scope of delivery of the valve, please refer to the "Data sheet" of this valve
(part I of these operating instructions).
2 Important general information