Bosch Rexroth lndraDrive HCS02 Series, Руководство по планированию проекта

Страница: 290 / 382

Properties
Data Unit Min. Typ. Max.
number of poles 4
type spring terminal
design pins at device
connection cable solid wire mm 2 0,5 1,5
connection cable stranded wire mm 2 0,5 1,5
AWG 20 16
Fig.8-54: Properties
8.17 Terminal Block, 24V - 0V (24V Supply)
Function, Pin Assignment
Connection of external 24V supply:
24V supply of HMS, HMD, HCS power sections (not at HCS02)
●
for the power section of the drive controller
● for brake control via X6
● for the control section of the drive controller with the optional modules,
except for such optional modules (e.g. safety technology S1) which require
their own power supply
24V supply of HMV supply units
●
for the integrated electronics
● for the 24V interface of the mains connection for ON/OFF control
View Identifica‐
tion
Function
+24V power supply
connection to neighboring devices with contact bars from the
HAS01.1 accessory
0V reference potential for power supply
connection to neighboring devices with contact bars from the
HAS01.1 accessory
Screw connection
M6 thread at device (terminal block)
Unit Min. Max.
tightening torque Nm 5,5 6,5
power consumption W see P
N3
(see index entry with reference to the corresponding
page)
voltage load capacity V see U
N3
(see index entry with reference to the corresponding
page)
polarity reversal protection within the allowed voltage range by internal protective diode
current carrying capacity “looping through” from 24V to 24V, 0V to 0V
(contact bars in scope of supply of accessory HAS01)
with contact bars -072-
A 220
Fig.8-55: Function, pin assignment, properties
280/369 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraDrive | Project Planning Manual
Functions and Electrical Connection Points