Bosch Rexroth IndraDyn S MS2N, Руководство по эксплуатации

Страница: 87 / 118

Terminal boxes "C", power (double cable connection)
MS2N 4) 5)
Clamp / data IndraDrive
Cabel RL2 6)
U Bolts M8, M
A
6 ... 12 Nm
Rated cross section 50 mm 2
Rated current 150 A
A1 1
V A2 2
W A3 3
1
Tension spring connection 0.5 ... 2.5 mm 2 with wire end
ferrules
BD(+) 7
2 BD(-) 8
3 TP1(+) 5
4 TP2(-) 6
Screwed connection M8, M
A
3.8 Nm
PE GNYE
Shld Shld
Tab. 6-21: MS2N Pin assignment terminal boxes "C"
Motor Opening for cable insert "X" Opening for cable insert "Y"
MS2N10-E0BNL-xxCxx-xxxxx-xx
MS2N10-F0BHL-xxCxx-xxxxx-xx
3x M50 1x M20
Tab. 6-22: MS2N terminal boxes "C" cable entry
4)
Terminal 1, 2 are not assigned for motors without holding brake.
5)
Terminal 3, 4 are not assigned for encoder Cx, Dx. The motor temperature is transmitted via the encoder interface.
6)
Assign not used connection wires within the terminal box.
MS2N Synchronous Motors Bosch Rexroth AG
Assembly
DOK-MOTOR*-MS2N*******-IT03-EN-P
65/95