Bosch Rexroth IndraDyn S MS2N Скачать руководство пользователя

Страница: 101 / 118

8 Maintenance and repair

Danger! Electric voltage! Operations in the vi-
cinity of live parts are extremely dangerous.

WARNING

Any work required on the electric system may be carried out only by

skilled electricians. Tools for electricians (VDE tools) are absolutely

necessary.

Prior to commencing work:

1. Isolate (even auxiliary circuits).
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.

Personal and material damage during mainte-
nance work in operation!

WARNING

●

Do not carry out any maintenance measures while the machine is

running.

●

While carrying out maintenance work, secure the machine such that

it cannot restart or be used by unauthorized persons.

Hot surfaces with temperatures over 70 °C may
cause burns!

CAUTION

●

Allow the motors to cool down prior to commencing work.

●

Wear safety gloves.

●

Do not work on hot surfaces.

8.1 Maintenance

Motors
Excessive dirt, chips or dust can negatively influence the motor functions. In ex-

treme cases lead to motor loss. Clean the cooling fins of the motors at regular

intervals (after one year at the latest) to reach a sufficiently high heat emission

surface. If the cooling fins are partially covered with dirt, sufficient heat dissipa-

tion via the ambient air is no longer ensured.
An insufficient heat radiation may have undesired consequences. The bearing

lifetime is reduced by operation at impermissibly high temperatures (the bearing

MS2N Synchronous Motors

Bosch Rexroth AG

Maintenance and repair

DOK-MOTOR*-MS2N*******-IT03-EN-P

79/95

Содержание Rexroth IndraDyn S MS2N























































































































Результаты поиска

Содержание Rexroth IndraDyn S MS2N

Отзывы:

Похожие инструкции для Rexroth IndraDyn S MS2N

Бренды по названию

Популярные бренды

Bosch Rexroth IndraDyn S MS2N, Руководство по эксплуатации

Результаты поиска

Содержание Rexroth IndraDyn S MS2N

Отзывы:

Похожие инструкции для Rexroth IndraDyn S MS2N

Бренды по названию

Популярные бренды