Bosch Rexroth IndraControl VPP 21.2, Руководство по планированию проекта

Страница: 50 / 75

Fig.7-6: USB interfaces
Pin Function
1 USB power supply (max. 500 mA)
2 Data -
3 Data +
4 USB ground
7.3.6 Ethernet Interfaces
The VPP 21 can be connected with Ethernet networks via the interfaces Eth.1
and Eth.2.
RJ45 female connector, 8-pin
Type: Ethernet 10Base T / 100Base X
Cable length: 100 m max.
Cable type: Shielded, twisted pair
Transmission rate: 10 or 100 Mbits/s
Fig.7-7: Ethernet Interface
The driver configuration of the network connection can be called up in the task
bar or in the "Control Panel" with icon "Network Board". Here you can set among
other values, if the data transmission shall occur with 10 Mbits/s and/or with
100 Mbits/s.
Please observe that the network board of the outstation has to be
able to process the same data transmission rate.
Project Planning Manual | Rexroth IndraControl VPP 21.2 Electric Drives
and Controls
| Bosch Rexroth AG 43/65
VPP 21-Box
Ethernet – Network connection