Bosch Rexroth IndraControl VPP 21.1 BP, Руководство по планированию проекта

Страница: 25 / 78

VPP 21.1 Technical Data
4-3
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
Note: A slot for a 2.5" hard disk is integrated in the connector panel
of the VPP 21 box. If you use a hard disk, which is not suitable
for the ambient conditions mentioned in Fig. 4-4:, you must
ensure the ambient conditions required by the hard disk
manufacturer for the VPP 21.
4.5 Used Standards
The system components of the VPP 21.1 correspond to the following
standards:
Standard Meaning
EN 60 204-1 Electrical equipment of machines
EN 61 131-2 PLC product standard
EN 50 081-2 Basic technical standard, emitted interference
(industrial environment)
EN 60 529 Degrees of protection (incl. housings and installation
compartments)
EN 60 068-2 Vibration, free fall and shock
EN 50 178 Clearances and creepage distances
EN 61 000-6-2 Basic technical standard, noise immunity (industrial
environment)
Fig. 4-5: Used standards
Note: Concerning delivered VPP 21.1 all CE requirements are
fulfilled.
The devices of the VPP 21 family are basically certificated according to
•
UL508 (Industrial Control Equipment) and
•
C22.2 No. 14-M95 (CSA)
However, it is possible that there are combinations or extension stages
with restricted or missing certification. Thus, verify the registration
according to the UL marking on the device.
Note: To guarantee an UL/CSA-compliant operation, you have to
fulfill the following conditions:
•
Use 60/75
°
C copper wire only.
•
Use Class 1 wire only or equivalent.
Note: The UL/CSA marking is only valid for the device in its delivery
status. After having modified the device, e. g. after plugging-in
additional extension cards, the UL compliancy has to be
verified.
UL/CSA Certification