Bosch Rexroth IndraControl VPP 21.1 BP, Руководство по планированию проекта

Страница: 49 / 78

VPP 21.1 VPP 21 Box
7-3
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
7.3 Interfaces
Note: Malfunctions caused by insufficient shielding!
Use only shielded cables and metallic/conductive connector or
coupling covers with large-area screen contact.
Overview
Des. on
the
housing Type of connection Type of connector
(integrated) Mating connector or cable
(from outside)
E MS PS/2 mouse Mini-DIN PS/2 female
connector, 6-pin Mini-DIN PS/2 male connector,
6-pin
E KB PS/2 Keyboard/Mouse Mini-DIN PS/2 female
connector, 6-pin Mini-DIN PS/2 male connector,
6-pin
E VGA VGA connection of an external CRT monitor VGA HD female connector,
15-pin VGA HD male connector, 15-pin
E Eth.1, Eth.2 Network connection:
Ethernet 10Base T / 100Base X
RJ45 female connector, 8-pin RJ45 male connector
(twisted pair, 8-core)
E COM Serial interface:
RS232 (UART 16550), not assigned D-Sub male connector, 9-pin D-Sub female connector, 9-pin
E USB USB interface, type 1 USB female connector, 4-pin,
type A USB male connector, 4-pin
E CF Slot for Compact-Flash card as boot medium
E Slot for 2.5" hard disk
E X10 24 VDC, digital outputs, ready contact Weidmüller male connector
terminal, MSTB 1.5, 8-pin Female connector terminal,
MSTB 1.5, 8-pin
E Field bus D-Sub male connector, 9-pin D-Sub female connector, 9-pin
Connection
point: VPP 21 box
Fig. 7-4: Connector type VPP 21
Furthermore, a reset button (Res.) is provided.
Note : The contacts for E-STOP as well as the START and STOP
pushbutton are described on page 6-10.