Bosch Rexroth IndraControl VPP 21.1 BP, Руководство по планированию проекта

Страница: 52 / 78

7-6
VPP 21 Box VPP 21.1
DOK-SUPPL*-VPP*21.1***-PR02-EN-P
Ethernet Interface
The VPP 21 can be connected with Ethernet networks via the interfaces
Eth.1 and Eth.2.
RJ45 female connector, 8-pin
Type: Ethernet 10Base T / 100Base X
Cable length: Max. 100 m
Cable type: Shielded, 2-core, twisted
Transmission rate: 10 or 100 Mbits/s
max. 100 m
1
8
2
1
3
4
5
6
7
8
Ethernet RJ45
To the network
Ethernet
ethernet_sst.cdr9
Fig. 7-7: Ethernet interface
The driver configuration of the network connection can be called up in the
task bar or in the "Control Panel" with icon "Network Board". Here you can
set among other values, if the data transfer shall occur with 10 Mbits/s
and/or with 100 Mbits/s.
Note: Please observe that the network board of the outstation has to
be able to process the same data transmission rate.
Ethernet – Network Connection