Bosch Rexroth ID 200/C-PDP, Руководство пользователя

Страница: 41 / 84

Communication with ID 200/C-PDP 41/84
3 842 540 399/2016-11, MIT: ID 200, Bosch Rexroth AG
7.3.6 System commands
change tag (CT)
Command:
Byte Table of contents Bit no.
7 6 5 4 3 2 1 0
Byte 0 Command code (04h) 0 0 0 0 0 1 0 0
Byte 1 reserved/RFID channel/toggle bit – – – – <RFIDChannel> <T>
Byte 2
Data carrier type in ASCII <TagType> (High Byte)
Byte 3 Data carrier type in ASCII <TagType> (Low Byte)
Byte 4 unused – – – – – – – –
Byte 5 unused – – – – – – – –
Byte 6 unused – – – – – – – –
Byte 7
unused – – – – – – – –
Reply:
Byte Table of contents Bit no.
7 6 5 4 3 2 1 0
Byte 0 Command code (04h) 0 0 0 0 0 1 0 0
Byte 1
reserved/RFID channel/toggle bit – – – – <RFIDChannel> <T>
Byte 2 Status <Status>
Byte 3 Reply counter <ReplyCounter>
Byte 4 unused – – – – – – – –
Byte 5 unused – – – – – – – –
Byte 6
unused – – – – – – – –
Byte 7 unused – – – – – – – –
This command tells the antenna on the relevant channel which data carrier type it is
communicating with. This setting is saved non-volatile in the communication module.
EN
GLISH