manualshive.com logo in svg

Bosch Rexroth GTE Series, Руководство по планированию проекта

Поделиться
Скачать
Bosch Rexroth GTE Series Скачать руководство пользователя страница 74

Countermeasures

1.

Check the layout of the drive for changed requirements. Do not operate

any longer at overload. Risk of damage!

2.

Reset to the original parameters. Check the layout of the drive in the case

of changed requirements.

11.5.3 

Gearbox-Motor Unit Generates Vibrations

Status

Audible or tactile vibrations occur on the gearbox-motor unit.

Possible Causes

1.

Driven machine elements are insufficient, not balanced or insufficiently

coupled.

2.

Gearbox-motor bearings worn or defective. Available bearing lifetime or

grease lifetime elapsed.

3.

Gearbox-motor fixing are loosened.

4.

Drive system is instable from a control point of view.

Countermeasures

1.

Check balance of driven machine elements. Check the key and the key‐

way. In the case of damage, contact Rexroth Service.

2.

Check the gearbox for damage. In the case of loss, contact Rexroth Serv‐

ice.

3.

Fasten motor properly and check for damage. In the case of loss, contact

Rexroth Service.

4.

Check parameters of the drive system (motor and encoder data). Observe

the notes in the documentation for the drive controller.

11.5.4 

Specified Position is not Attained

Status

The positioning command of the control unit is not precisely executed, or not at

all. No malfunction display on the device controller or the control.

Possible Causes

1.

Motor drive shaft machine element connection loose.

2.

Motor shaft - gearbox connection loose.

3.

Gearing defective.

Countermeasures

1.

Check the mechanical connection. Do not continue to use damaged parts.

2.

Check the mechanical connection. Do not continue to use damaged parts.

3.

Change of gearbox necessary. In the case of a malfunction, contact Bosch

Rexroth Service.

Bosch Rexroth AG

 DOK-GEAR**-GTE********-PR06-EN-P

 Rexroth GTE Planetary Gearboxes

72/85

Commissioning, Operation and Maintenance

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth GTE Series

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды