Bosch Rexroth GTE Series Скачать руководство пользователя

Страница: 13 / 88

Safety Instructions for Electric Drives and Controls

3.1

Definitions of Terms

Application Documentation

Application documentation comprises the entire documentation used to inform

the user of the product about the use and safety-relevant features for config‐

uring, integrating, installing, mounting, commissioning, operating, maintaining,

repairing and decommissioning the product. The following terms are also used

for this kind of documentation: User Guide, Operation Manual, Commissioning

Manual, Instruction Manual, Project Planning Manual, Application Manual, etc.

Component

A component is a combination of elements with a specified function, which are

part of a piece of equipment, device or system. Components of the electric drive

and control system are, for example, supply units, drive controllers, mains

choke, mains filter, motors, cables, etc.

Control System

A control system comprises several interconnected control components placed

on the market as a single functional unit.

Device

A device is a finished product with a defined function, intended for users and

placed on the market as an individual piece of merchandise.

Electrical Equipment

Electrical equipment encompasses all devices used to generate, convert, trans‐

mit, distribute or apply electrical energy, such as electric motors, transformers,

switching devices, cables, lines, power-consuming devices, circuit board as‐

semblies, plug-in units, control cabinets, etc.

Electric Drive System

An electric drive system comprises all components from mains supply to motor

shaft; this includes, for example, electric motor(s), motor encoder(s), supply

units and drive controllers, as well as auxiliary and additional components, such

as mains filter, mains choke and the corresponding lines and cables.

Installation

An installation consists of several devices or systems interconnected for a de‐

fined purpose and on a defined site which, however, are not intended to be

placed on the market as a single functional unit.

Machine

A machine is the entirety of interconnected parts or units at least one of which

is movable. Thus, a machine consists of the appropriate machine drive ele‐

ments, as well as control and power circuits, which have been assembled for

a specific application. A machine is, for example, intended for processing,

treatment, movement or packaging of a material. The term "machine" also cov‐

ers a combination of machines which are arranged and controlled in such a way

that they function as a unified whole.

Manufacturer

The manufacturer is an individual or legal entity bearing responsibility for the

design and manufacture of a product which is placed on the market in the in‐

dividual's or legal entity's name. The manufacturer can use finished products,

finished parts or finished elements, or contract out work to subcontractors.

However, the manufacturer must always have overall control and possess the

required authority to take responsibility for the product.

Product

Examples of a product: Device, component, part, system, software, firmware,

among other things.

Project Planning Manual

A project planning manual is part of the application documentation used to

support the sizing and planning of systems, machines or installations.

Qualified Persons

In terms of this application documentation, qualified persons are those persons

who are familiar with the installation, mounting, commissioning and operation

of the components of the electric drive and control system, as well as with the

hazards this implies, and who possess the qualifications their work requires. To

comply with these qualifications, it is necessary, among other things,

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

11/85

Safety Instructions for Electric Drives and Controls

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Rexroth GTE Series

























































































Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды

Bosch Rexroth GTE Series, Руководство по планированию проекта

Результаты поиска

Содержание Rexroth GTE Series

Отзывы:

Похожие инструкции для Rexroth GTE Series

Бренды по названию

Популярные бренды