Bosch Rexroth ctrlX SAFETY Скачать руководство пользователя страница 50

Страница: 50 / 72

The safety function "Safe Torque Off" is automatically activated after the

booting process. It cannot be deactivated.

8.5

Requirements for the control unit

Optional safety technology module

"T0"

In conjunction with the optional safety technology module "T0" there are the

following requirements for the control unit:
●

Before selecting the safety function, decelerate the drive using the

command value input and disable the drive torque.

●

If the safety function is selected via the control unit, the selection at least

has to comply with the required safety level of the application.

●

If the safety function is selected via isolated selection contacts (passive

safety unit), it has to be ensured that the test pulses described in

chapter "Dynamization" are not inhibited.
‑ or ‑
The control unit features OSSD outputs (active safety unit) and has to

monitor the wiring between the control unit and the safety option, as well

as detect errors in the wiring.

44/65

Commissioning the safety technology

ctrlX SAFETY "Safe Torque Off" Safety Option in ctrlX DRIVE

Bosch Rexroth AG R911383774_Edition 03

Содержание Rexroth ctrlX SAFETY









































































Результаты поиска

Содержание Rexroth ctrlX SAFETY

Отзывы:

Похожие инструкции для Rexroth ctrlX SAFETY

Бренды по названию

Популярные бренды

Bosch Rexroth ctrlX SAFETY, Руководство по применению

Результаты поиска

Содержание Rexroth ctrlX SAFETY

Отзывы:

Похожие инструкции для Rexroth ctrlX SAFETY

Бренды по названию

Популярные бренды