Bosch Rexroth ctrlX SAFETY Скачать руководство пользователя страница 27

Страница: 27 / 72

4.5

Safety characteristics of the safety system

4.5.1

Introduction

For using the optional safety technology module "T0", the ctrlX DRIVE

system has been certified according to IEC 61508, IEC 61800-5-2,

IEC 62061 and ISO 13849-1.
The risk assessment and risk reduction of a machine require the safety

functions of the individual components to be assessed. The interaction of the

components has to be taken into account, too. In addition to the systematic

suitability, it is also necessary to determine the total PFH value for the

machine or the machine part (e.g., a safety zone). The total PFH value allows

assessing whether the required "Safety Integrity Levels" (SIL

) or

"Performance Levels" (PL

) have been complied with. For the optional safety

technology module "T0", the paragraph below shows how to determine the

PFH value for a drive system and how to integrate additional external

components.

The manufacturer-independent software wizard "SISTEMA" is

suited for calculating the total PFH value.
You can procure SISTEMA libraries from our

website

For more information, please see the website of

"Institut für

Arbeitsschutz der DGUV (IFA)"

[Institute for Occupational Safety

and Health of the German Social Accident Insurance (IFA)].

There you can download the SISTEMA software free of charge.
Your advantages:
●

Quickly calculating the Performance Level

●

Easily and quickly accessing safety characteristics

●

Safety characteristics for certified components

4.5.2

Optional safety technology module "T0"

Drives equipped with the optional safety technology module "T0" comply with

the following "Safety Integrity Level" (SIL) or "Performance Level" (PL):
●

Up to SIL3 according to IEC 62061

●

Up to Category 4, PL e according to ISO 13849-1

The ctrlX DRIVE system with the optional safety technology module "T0" has

the following safety characteristics:

Description

ctrlX DRIVE

PFH

1),

<2×10

-9

1/h (2% SIL3) (preliminary)

Mission Time

175,200 h (20 years)

"Proof Test" interval

175,200 h (20 years)

MTTF

d/channel

> 200 years (preliminary)

avg

> 99 % (preliminary)

The specified safety characteristics refer to an average ambi‐

ent temperature of 40 °C (see also "Ambient and operating

conditions" in the Project Planning Manuals).

Tab. 4-7:

Safety characteristics of the ctrlX DRIVE system with the optional

safety technology module "T0"

ctrlX SAFETY "Safe Torque Off" Safety Option in ctrlX DRIVE

21/65

System overview

R911383774_Edition 03 Bosch Rexroth AG

Содержание Rexroth ctrlX SAFETY









































































Результаты поиска

Содержание Rexroth ctrlX SAFETY

Отзывы:

Бренды по названию

Популярные бренды

Bosch Rexroth ctrlX SAFETY, Руководство по применению

Результаты поиска

Содержание Rexroth ctrlX SAFETY

Отзывы:

Бренды по названию

Популярные бренды