Bosch Rexroth 3 Series Скачать руководство пользователя | Manualshive

Страница: 48 / 68

background image

48/68 Operation

Bosch Rexroth AG

, A4CSG, Series 3x, RE 92105-01-B/06.2017

9 Operation

The product is a component which requires no settings or changes during operation.
For this reason, this chapter of the manual does not contain any information on
adjustment options. Only use the product within the performance range specified
in the technical data, see data sheet 92105. The machine/system manufacturer is
responsible for the proper project planning of the hydraulic system and its control.

9.1 Operating the optional auxiliary activation device

wARnInG

Risk of injury due to the working movement of a connected consumer!

▶

Only operate the auxiliary activation device if it is ensured that it will not trigger
any potentially dangerous working movements of the connected consumer!

NOTICE

Property damage to the proportional solenoids!

Property damage to the proportional solenoids!
There is a risk of damage to the proportional solenoids

▶

Do not actuate the auxiliary activation device with sharp-edged tools! There is a
risk of damage to the proportional solenoids.

• The valves of the electro-hydraulic control device are fitted with an auxiliary

activation device. This auxiliary activation device can be used to trigger the
function of the valve when the proportional solenoid is not actuated.

• The auxiliary activation device is only designed for manual operation and for brief

manual actuation; it must not be moved to a specific switch position by means of
mechanical equipment for either a longer period of time or permanently.

• The auxiliary activation device is not suitable for frequently recurring manual

actuation!

• The auxiliary activation device is located on the side of the proportional solenoid

facing away from the valve.

«
...
46
47
48
49
50
...
»

Содержание Rexroth 3 Series





































































Отзывы:

Нет отзывов

Похожие инструкции для Rexroth 3 Series

Бренд: Danfoss Страницы: 40

Бренд: Gardena Страницы: 17

Бренд: Calpeda Страницы: 80

Бренд: Jandy Страницы: 108

TriScroll 300 Series

Бренд: Varian Страницы: 19

Бренд: Radiant Страницы: 24

Бренд: Ulvac Страницы: 54

Бренд: P.Lindberg Страницы: 54

Бренд: Nakayama Страницы: 29

Бренд: SFA-SANIFLO Страницы: 14

Бренд: Waterax Страницы: 30

Бренд: JEC Pumps Страницы: 66

Бренд: Grundfos Страницы: 44

Бренд: Homa Страницы: 40

Бренд: Textron Страницы: 20

Бренд: DAE Pumps Страницы: 29

Pneumatic grease pump 50:1

Бренд: Pressol Страницы: 14

Бренд: salmson Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды