Bosch Readykey X UDS-10, Руководство по установке

Страница: 8 / 12

8 17553v1.0
Enter the following information:
IP Address The IP Address displayed will be the one that was entered in
Section 3.1. Do not change this value; press Enter to move onto
the next step.
Set Gateway Address Press the Y key, and press Enter .
Gateway IP Addr Enter the gateway IP address and press Enter .
Netmask The subnet mask (‘netmask’) is entered in an unusual fashion. The
prompt asks for the number of bits. For example, 255.255.255.0
corresponds to 8 bits. See the table below for other examples.
Mask Bits
255.0.0.0 24
255.255.0.0 16
255.255.240.0 12
255.255.248.0 11
255.255.254.0 9
255.255.255.0 8
255.255.255.128 7
255.255.255.192 6
255.255.255.224 5
255.255.255.240 4
255.255.255.248 3
Change telnet config
password Press the N key and press Enter .
The basic parameters menu will be displayed:
*** basic parameters
Hardware: Ethernet Autodetect
IP addr
192.168.004.241 , no gateway set,netmask 255.255.255.000
***************** Channel 1 *****************
Baudrate 9600, I/F Mode 4C, Flow 00
Port 10001
Datagram Type 01
Pack Cntrl: 00
Remote IP Adr:
192.168.004.147 , Port 00000
Change Setup : 0 Server configuration
1 Channel 1 configuration
7 Factory defaults
8 Exit without save
9 Save and exit Your choice ?