English |
19
Bosch Power Tools
1 609 929 T64 | (9.6.09)
Sawing Workpieces of the Same Length
(see figure G)
The length stop
6
can be used for easily sawing
workpieces to the same length.
– Adjust the desired workpiece length.
(see figures F1 – F2)
– Loosen locking knob
7
and position the
length stop
6
to the desired clearance to the
saw blade of the power tool.
– Retighten the locking knobs again.
Adjusting the Attachment-set Bracket
(see figure H)
After intensive use of the saw stand, the bracket
that locks the attachment set
1
to the saw table
via the the locking knob
5
may possibly require
readjustment.
– Remove the power tool from the attachment
sets.
– Turn the attachment set upside down.
– When the attachment set cannot be locked
to the saw stand despite firmly tightening the
locking knob, screw the adjustment screw
18
in clockwise direction.
When the attachment set does not fit onto
both rails (front and rear) of the saw stand at
the same time, screw the adjustment screw
18
in anticlockwise direction.
– Check the firm and correct seating of the at-
tachment set and repeat the adjustment, if
required.
– Repeat the worksteps with the second at-
tachment set.
Maintenance and Service
Maintenance
If the saw stand should fail despite the care tak-
en in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the saw
stand.
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
OBJ_BUCH-940-002.book Page 19 Tuesday, June 9, 2009 1:44 PM
