Bosch Professional GLM 50-23 G, Оригинальное руководство пользователя

Страница: 17 / 118

English | 17
Digital laser measure GLM 50-23 G
Unit of measurement setting m, ft, in
A) For measurements from the front edge of the measuring tool, this applies for high reflectivity of
the target (e.g. a white-painted wall), weak backlighting and 25 °C operating temperature. In ad-
dition, a deviation of ±0.05 mm/m must be taken into account, depending on the distance.
B) For measurements from the front edge of the measuring tool, this applies for high reflectivity of
the target (e.g. a white-painted wall), strong backlighting and 25 °C operating temperature. In
addition, a deviation of ±0.15 mm/m must be taken into account, depending on the distance.
C) After user calibration at 0 ° and 90 °; An additional grade error of ±0.01 °/degree to 45 ° (max.)
has to be taken into account. The left-hand side of the measuring tool serves as the reference
level for grade measurement.
D) At an operating temperature of 25 °C
E) In continuous measurement mode, the max. operating temperature is +40 °C.
F) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
The serial number (11) on the type plate is used to clearly identify your measuring tool.
Assembly
Inserting/changing the batteries
Using alkali-manganese or nickel metal hydride rechargeable batteries (especially at low
operating temperatures) is recommended for operation of the measuring tool.
With 1.2 V batteries, more measurements may be possible than with 1.5 V batteries, de-
pending on the capacity.
Press the locking mechanism
(12) to open the battery compartment cover (13) and re-
move the battery compartment cover. Insert the batteries. When inserting, pay attention
to the correct polarity according to the representation on the inside of the battery com-
partment.
When the state of charge of the batteries or reusable batteries is low, a request to activ-
ate the battery saver mode will appear on the display. When the battery saver mode is
activated, the battery runtime will be extended and the battery symbol on the display will
have a yellow outline(see "“Settings” menu (see figure
B )", page 19).
When the empty battery symbol first appears on the display, only a limited number of
measurements is still possible. When the battery symbol is empty and flashes red, no fur-
ther measurements are possible. Replace the batteries or reusable batteries.
Always replace all the batteries at the same time. Only use batteries from the same man-
ufacturer and which have the same capacity.
Bosch Power Tools 1 609 92A 62A | (21.12.2020)