Bosch Praesideo 3.5, Инструкция по установке и эксплуатации, Страница: 376 / 498

Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 9 | System Configuration en | 376
45.2.5 Delete a zone
Proceed as follows to delete a zone:
1 Go to
Configure > Zone & Amplifier > Zone
configuration . A screen similar to the one in
figure 45.7 appears.
2 Select the zone that must be deleted from the Name
dropdown list. For example, Departure 2 .
3 Click the Delete button to delete the zone. A pop-up
window asks to confirm this choice.
4 Click the OK button to confirm that the zone has to
be deleted. The deleted zone is no longer available in
the
Name dropdown list. It will also be removed from
all occasions where it i used in the configuration.
5 Submit the changes. Note that the changes are not
permanent until the configuration is saved (see
section 40.4.4 and section 40.4.5).
45.2.6 Rename a zone
Proceed as follows to rename a zone:
1 Go to
Configure > Zone & Amplifier > Zone
configuration .
2 Select the zone that must be renamed from the Name
dropdown list.
3 Click the Rename button to rename that zone. A
screen similar to the one in
figure 45.8 appears.
4 Change the name in the edit field (the name may
consist of up to 16 characters) and click the OK
button. The name of the zone will be changed on all
occasions where it is used in the configuration.
5 Submit the changes. Note that the changes are not
permanent until the configuration is saved (see
section 40.4.4 and section 40.4.5).
figure 45.7: Delete zone, step 1
figure 45.8: Rename a zone, step 3