Bosch Praesideo 3.5, Инструкция по установке и эксплуатации

Страница: 474 / 498

Bosch Security Systems | 2011-02
Praesideo 3.5 | Installation and User Instructions | 11 | Optional Software en | 474
60 PC Call Station Client
60.1 Introduction
With the PC Call Station Client , you can connect to the
PC Call Server (see chapter 58) and start calls or control
the background music (BGM). The
PC Call Station Client
acts as an operator panel on a PC, similar to a normal
call station. It offers some functions that are not
available on normal call stations, such as:
•
The possibility to make calls to zones in different
subsystems, each having its own network controller.
• Easy control of multiple simultaneous calls (without
live speech).
• Accurate information about the status of the zones.
• Easy localization of zones on the screen using a
graphical background with multiple tabs.
• Accurate information about the BGM channel and
volume setting of BGM in each zone.
60.2 Requirements
The
PC Call Station Client
can run on any PC that meets
the following minimum requirements:
•
Operating system:
Microsoft® Windows XP with Service Pack 1 or
Microsoft® Windows Vista or
Microsoft® Windows 7
• Network connection: 100 base-T
• 1 GB RAM
60.3 Installation
Proceed as follows:
1 Start the PRS-SW Praesideo Software DVD (see
section 35.2).
2 Click Optional > PC call station client (see chapter 38).
A File Download window appears.
3 Proceed in the same way as for the
PC Call Server
Configuration Client (see section 59.3).
It is possible to install and use multiple PC Call Station
Clients on different PCs simultaneously, all network
connected. There are no hard limits to the maximum
number of
PC Call Station Clients , although the response
times will depend on the network speed and the
capabilities of the server PC.
60.4 Licensing
In order to use the PC Call Station Client , a license
must be obtained. By purchasing the PRS-CSC, one gets
a registration code that must be registered for the system
it is intended for. Registration is done via the Bosch
registration website, where the application is coupled to
the
PC Call Server and its dongle. See section 59.5.4.12.
60.5 Start
Proceed as follows:
1 Go to
Start > Programs > Bosch > Praesideo Vxx.yy.zzzz .
2 Click PC Call Station Client . A screen similar to the
one in figure 60.1 appears.
3 Type your login name in the Login Name field.
4 Type your password in the Password field.
5 Type the IP address or host name of the PC that is
running the PC Call Server in the Host field.
6 Choose the language in which the application shows
from the Language list.
7 Press the OK button. A screen similar to the one in
figure 60.2 appears.
figure 60.1: PC Call Station Client Login
Note
The login name and password are configured
with Configure Client Users item in the Edit menu
of the
PC Call Server Configuration Client
.