Bosch OBD 1350 Скачать руководство пользователя | Manualshive

Страница: 55 / 56

background image

580001 | REV. A | 11.2016

OBD 1350

ProGrade OBDII Scan Tool

| User guide |

55

|

en

9

Limited Warranty

THIS WARRANTY IS EXPRESSLY LIMITED TO ORIGINAL RETAIL BUYERS OF BOSCH ELECTRONIC DIAGNOSTIC TOOLS
(“UNITS”) .

BOSCH Automotive Service Solutions LLC Units are warranted against defects in materials and workmanship for one year (12 months)
from date of delivery. This warranty does not cover any Unit that has been abused, altered, used for a purpose other than that for which
it was intended, or used in a manner inconsistent with instructions regarding use. The sole and exclusive remedy for any Unit found to
be defective is repair or replacement, the option of BOSCH. In no event shall BOSCH be liable for any direct, indirect, special, incidental
or consequential damages (including lost profit) whether based on warranty, contract, tort or any other legal theory. The existence of a
defect shall be determined by BOSCH in accordance with procedures established by BOSCH. No one is authorized to make any state-
ment or representation altering the terms of this warranty.

DISCLAIMER

THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

SOFTWARE

Unit software is proprietary, confidential information protected under copyright law. Users have no right in or title to Unit software
other than a limited right of use revocable by BOSCH. Unit software may not be transferred or disclosed without written consent
of BOSCH. Unit software may not be copied except in ordinary backup procedures.

TECHNICAL SUPPORT

If you have any questions on the operation of the product, please call 1-800-228-7667.

REPAIR SERVICE

• Please contact Technical Support for troubleshooting and service options prior to sending any unit in for repair.
• To send a unit in for repair, go to repairtrack.bosch-automotive.com and follow the online instructions. This web site will also

have the latest Service policies and service center locations. If you do not have internet access, please call 1-800-344-4013.

«
...
53
54
55
56
»

Содержание OBD 1350

























































Отзывы:

Нет отзывов

Похожие инструкции для OBD 1350

Mentor Visual iQ

Бренд: GE Страницы: 2

Бренд: TANDBERG Страницы: 53

Бренд: Aaronia Страницы: 47

Бренд: Xylem Страницы: 24

Бренд: Facom Страницы: 48

Бренд: Technoline Страницы: 1

Бренд: Sur-Gard Страницы: 12

Бренд: Lutron Electronics Страницы: 43

Бренд: ACCRETECH Страницы: 104

Бренд: Laser Technology Страницы: 80

Бренд: HTC Страницы: 2

Бренд: Stabila Страницы: 14

zelsius C5 -IUF

Бренд: Zenner Страницы: 28

Бренд: R&S Страницы: 46

Бренд: General Страницы: 16

Бренд: WIKA Страницы: 52

Бренд: EIJKELKAMP Страницы: 11

ColorTrack Genesis

Бренд: Fresh Roast Systems Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды