104
en |
Advanced Mode
FlexiDomeHD 720p IP Camera
AR18-10-B013 | v1.52 | 2011.06
Installation and Operation Manual
Bosch Security Systems
9.8.2
Advanced
The settings on this page are used to set advanced settings the
network. Some changes only take effect after a reboot. In this
case
Set
changes to
Set and Reboot
.
1.
Make the desired changes.
2.
Click
Set and Reboot
.
The device is rebooted and the changed settings are activated.
SNMP
The camera supports the SNMP V2 (Simple Network
Management Protocol) for managing and monitoring network
components, and can send SNMP messages (traps) to IP
addresses. It supports SNMP MIB II in the unified code.
If
On
is selected for the SNMP parameter and a SNMP host
address is not entered, the device does not send the traps
automatically and will only reply to SNMP requests. If one or
two SNMP host addresses are entered, SNMP traps are sent
automatically. Select
Off
to deactivate the SNMP function.
1. SNMP host address / 2. SNMP host address
To send SNMP traps automatically, enter the IP addresses of
one or two target devices here.
SNMP traps
To choose which traps are sent:
1.
Click
Select
. A dialog box appears.
2.
Click the check boxes of the appropriate traps.
3.
Click
Set
to close the window and send all of the checked
traps.
Authentication (802.1x)
To configure Radius server authentication, connect the camera
directly to a computer using a network cable. If a Radius server
controls access rights over the network, select
On
to activate
authentication to communicate with the device.
1.
Enter the user name that the Radius server uses for the
camera in the
Identity
field.
2.
Enter the
Password
that the Radius server expects from
the camera.
Содержание NDN-921
Страница 1: ...FlexiDomeHD 720p IP Camera NDN 921 en Installation and Operation Manual ...
Страница 2: ......
Страница 133: ......
Страница 134: ...Bosch Security Systems www boschsecurity com Bosch Security Systems 2011 ...
