Bosch MIC IP starlight 7000i Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 86

background image

40

en | Recording

AUTODOME IP starlight 7000i

2020-07 | v0.7 |

User Manual

Bosch Security Systems

6

Recording

6.1

Introduction to recording

Images can be recorded to an appropriately configured iSCSI system or, for devices with an
SD slot, locally to an SD card.

SD cards are the ideal solution for shorter storage times and temporary recordings. They can
be used for local alarm recording or to improve the overall reliability of video recording.
For long-term authoritative images use an appropriately sized iSCSI system.

Two recording tracks are available (

Recording 1

and

Recording 2

). The encoder streams and

profiles can be selected for each of these tracks for both standard and alarm recordings.
Ten recording profiles are available where these recording tracks can be defined differently.
These profiles are then used for building schedules.

A Video Recording Manager (VRM) can control all recording when accessing an iSCSI system.
The VRM is an external program for configuring recording tasks for video servers.

6.2

Storage Management

6.2.1

Device manager

An external Video Recording Manager (VRM) system for the unit is configured via the
Configuration Manager. The

Managed by Video Recording Manager software

box is only an

indicator; it cannot be changed here.
If the

Managed by Video Recording Manager software

box is checked, you are not able to

configure any further recording settings on this page.

6.2.2

Recording media

Select a media tab to connect to the available storage media.

iSCSI Media

To use an

iSCSI system

as the storage medium, a connection to the desired iSCSI system is

required to set the configuration parameters.
The storage system selected must be available on the network and completely set up. It must
have an IP address and be divided into logical drives (LUNs).
1.

Enter the IP address of the required iSCSI destination in the

iSCSI IP address

field.

2.

If the iSCSI destination is password protected, enter the password into the

Password

field.

3.

Click

Read

.

–

The connection to the IP address is established.

The

Storage overview

field displays the logical drives.

Local Media

An SD card inserted in the camera can be used for local recording.
–

To use the SD card for Automatic Network Replenishment (ANR), select the check box.

–

If the SD card is password-protected, enter the password into the

Password

field.

The

Storage overview

field displays the local media.

Note

: The recording performance of the SD card depends on the speed (class) and the

performance of the SD card. Bosch recommends an SD card of Class 6 or higher.

«
...
38
39
40
41
42
...
»

Содержание MIC IP starlight 7000i























































































Отзывы:

Нет отзывов

Похожие инструкции для MIC IP starlight 7000i

Бренд: VEKOOTO Страницы: 18

Бренд: Zenith Страницы: 18

Disccovery 290S ZOOM Date

Бренд: FujiFilm Страницы: 32

Fixed Box Series

Бренд: Brickcom Страницы: 23

CAMEDIA C-4040 Zoom

Бренд: Olympus Страницы: 4

Бренд: JAI Страницы: 87

Бренд: Displays2go Страницы: 25

Бренд: Alecto Страницы: 2

Бренд: Lensbaby Страницы: 2

Бренд: iBeam Страницы: 2

Бренд: BrandMotion Страницы: 6

Бренд: BTC Страницы: 60

Бренд: Advent Страницы: 13

Бренд: DRS Technologies Страницы: 83

Бренд: Aputure Страницы: 16

Бренд: Vechline Страницы: 13

Бренд: Costar Страницы: 28

Бренд: Kraun Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды