Bosch MIC IP starlight 7000i Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 86

background image

16

en | Web Interface

AUTODOME IP starlight 7000i

2020-07 | v0.7 |

User Manual

Bosch Security Systems

4

Web Interface

4.1

Appearance

You can adapt the appearance of the web interface and change the website language to meet
your requirements.
GIF or JPEG images can be used to replace the company and device logos. The image can be
stored on a web server (for example, http://www.myhostname.com/images/logo.gif).
Ensure that a connection to the web server is always available to display the image. The image
files are not stored on the unit.
To restore the original graphics, delete the entries in the

Company logo

and

Device logo

fields.

Website language

Select the language for the user interface.
The default language is English. After selecting a different language, click the

Set

button. The

page refreshes automatically. The GUI now displays field names and options as well as OSD
messages in the selected language.

Company logo

To replace the company's logo in the top-right part of the window, enter the path to a suitable
image in this field. The image file must be stored on a web server.

Device logo

To replace the device name in the top-left part of the window, enter the path to a suitable
image in this field. The image file must be stored on a web server.

Notice!

If you want to use the original image again, delete the entries in the fields

Company logo

and

Device logo

.

Show VCA metadata

When video content analysis (VCA) is activated, additional information is displayed in the live
video stream. With the analysis type, for example, the sensor fields in which motion
is recorded are marked with yellow rectangles.
Using Essential Video Analytics or Intelligent Video Analytics, the outlines of detected objects
are displayed in following colors:
–

Red: Objects that generate an alarm event under the current settings appear on the
camera image inside a red outline.

–

Orange: An object that has triggered one alarm event but does not generate another
appears inside an orange outline (example: object has crossed a line). During forensic
search, an object that triggers an alarm event has an orange outline from the beginning.

–

Yellow: Objects that are detected as moving but do not generate an alarm event under
the current settings appear inside a yellow outline.

Show VCA trajectories

The trajectories (motion lines of objects) from the video content analysis are displayed in the
live video image if a corresponding analysis type is activated. The trajectory is shown as a
green line following the object base point.

Show overlay icons

Select this check box to show overlay icons on the live video image.

Show VCA items

Shows alarm fields, lines and routes configured for the video analytics in the following colors:

«
...
14
15
16
17
18
...
»

Содержание MIC IP starlight 7000i























































































Отзывы:

Нет отзывов

Похожие инструкции для MIC IP starlight 7000i

Бренд: Uniden Страницы: 140

PIH-0364X WN IP

Бренд: Lilin Страницы: 29

Бренд: Olympus Страницы: 4

Бренд: cycliq Страницы: 31

Бренд: Pix-Star Страницы: 79

Бренд: Roav Страницы: 11

Бренд: Casio Страницы: 143

EASYSHARE DX3700

Бренд: Kodak Страницы: 86

Бренд: FLIR Страницы: 18

Бренд: Kodak Страницы: 28

Бренд: Samcon Страницы: 28

Бренд: GPX Страницы: 2

Бренд: Hama Страницы: 194

Бренд: IDS Страницы: 22

MATRIX VISION BVS 3D-RV1

Бренд: Balluff Страницы: 64

Бренд: Basler Страницы: 170

Бренд: Wansview Страницы: 22

Бренд: Lamax Electronics Страницы: 99

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды