
User Manual | Mitchell Diagnostics | Scan Tool | 11 | en
©Mitchell International, Inc.
581624 | REV. B | 06.2017 | APDMD032018
Turning off handset:
9:40
Today is Thu, 04 Jan 2018.
Saved Diagnostic Data
Browser
Select Vehicle
Settings
OBDII
Heavy Duty
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
ss01713
MD-200
1. Press and release the power button.
9:40
Today is Thu, 04 Jan 2018.
Saved Diagnostic Data
Browser
Select Vehicle
Settings
OBDII
Heavy Duty
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
Power off
MRST will shut down.
Cancel
OK
ss02856
2. Select OK. The tool will now shutdown.
Test Startup and Vehicle Connection
1. Turn ON the handset.
2. Connect the OBDII/DLC cable to the scan tool.
3. Connect the OBDII/DLC cable to the DLC on the
vehicle.
4. Turn the ignition ON, but keep the engine OFF
(KOEO).
5. Select vehicle from the Main Menu screen.
6. Enter the vehicle information one of two ways:
• AutoID
• Manual entry
7. From the Vehicle selected screen, select any
diagnostic function.
Settings
Settings allow the user to make adjustments to the
following:
• Applications
• Software information
• Software update
• Printer Setup
• Subscriptions
• User Detail
• Language
• Direct-Hit
• Service
• Report Options
9:40
Today is Thu, 04 Jan 2018.
Saved Diagnostic Data
Browser
Select Vehicle
Settings
OBDII
Heavy Duty
MAIN MENU - Tap Below To Begin Your Diagnostic Experience
ss02852
1. Select Settings from the Main Menu.
Application Settings
From the Settings screen select Application Settings.
Follow the prompts on the screen to make changes
to the following:
• Demo Mode
• Turn Demo mode ON or OFF
• Units of measure
• Switch between Standard or Metric
• Use TPR
• Enable TRP
• Data Steam Scroll Options
• Select scrolling options